How to Replace Your Keurig Water Filter

Replacing the water filter in your Keurig brewer is an important maintenance task that helps keep your coffee tasting fresh and your machine running properly. We recommend changing the filter every two months or 60 tank refills. Here is a step-by-step guide on how to easily replace a Keurig water filter.

Why Replace the Water Filter

The water filter in your Keurig catches scale, minerals, and other impurities from your water before they reach the internal workings of the machine. Over time, the filter becomes less effective at this job. Replacing it regularly helps:

• Improve coffee taste by filtering out odors, chlorine, and sediment
• Reduce mineral buildup inside the brewer that can lead to equipment damage
• Prolong the life of your Keurig by keeping critical components clean

Replacing the filter as recommended is inexpensive maintenance that saves money in the long run by avoiding costly repairs or early replacement of the entire brewer.

How Often to Change the Filter

Keurig recommends replacing the water filter every 2 months or 60 tank refills, whichever comes first. Write the date you install each new filter on the filter holder or set a reminder in your phone so you know when it’s time.

If you don’t use your brewer daily, go by the number of tank refills rather than the calendar. An infrequently used Keurig may only need one or two filter changes per year.

What You Need

• Keurig water filter cartridge
• Filter removal tool (may be included with new cartridge or the brewer)

Keurig water filters are widely available in stores and online. Be sure to get the correct cartridge for your brewer model.

Step-By-Step Filter Replacement

Replacing the filter cartridge is a quick and straightforward process:

1. Remove the water reservoir from the brewer and empty any remaining water.
2. Locate the filter holder at the bottom of the reservoir. Remove the old cartridge from the holder using the removal tool.
3. Prepare the new filter cartridge by soaking it upside down in a cup of water for 5 minutes. This helps activate the filter.
4. Rinse the new filter under running water for another 30 seconds after soaking.
5. Insert the prepared cartridge firmly into the filter holder until it clicks into place.
6. Replace the reservoir in the brewer, fill with fresh water, and run a cleansing brew without a pod to flush the system.

And that’s it! With the new filter installed, your Keurig is ready to keep brewing great tasting coffee.

FAQs

Replacing your Keurig’s water filter as recommended takes just minutes but pays off in the long run by maintaining great tasting coffee and keeping your brewer running its best for years.